This is libm.info, produced by makeinfo version 4.6 from
/netrel/src/cygwin-1.5.10-3/newlib/libm/libm.texinfo.

START-INFO-DIR-ENTRY
* libm::                        An ANSI-C conforming mathematical library.
END-INFO-DIR-ENTRY

   This file documents an ANSI-C conforming mathematical subroutine
library.

   Copyright (C) 1992, 1993, 1995, 1996-2004 Red Hat, Inc.

   `libm' includes software developed at SunPro, a Sun Microsystems,
Inc. business.  Permission to use, copy, modify, and distribute this
software is freely granted, provided that this notice is preserved.

   Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

   Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, subject to the
terms of the GNU General Public License, which includes the provision
that the entire resulting derived work is distributed under the terms
of a permission notice identical to this one.

   Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions.


File: libm.info,  Node: Top,  Next: Math,  Up: (dir)

LIBM
****

* Menu:

* Math::           The mathematical functions (`math.h').
* Reentrancy::     The functions in libm are not reentrant by default.
* Index::


File: libm.info,  Node: Math,  Next: Reentrancy,  Prev: Top,  Up: Top

Mathematical Functions (`math.h')
*********************************

This chapter groups a wide variety of mathematical functions.  The
corresponding definitions and declarations are in `math.h'.  Two
definitions from `math.h' are of particular interest.

  1. The representation of infinity as a `double' is defined as
     `HUGE_VAL'; this number is returned on overflow by many functions.

  2. The structure `exception' is used when you write customized error
     handlers for the mathematical functions.  You can customize error
     handling for most of these functions by defining your own version
     of `matherr'; see the section on `matherr' for details.

   Since the error handling code calls `fputs', the mathematical
subroutines require stubs or minimal implementations for the same list
of OS subroutines as `fputs': `close', `fstat', `isatty', `lseek',
`read', `sbrk', `write'.  *Note System Calls: (libc.info)syscalls, for
a discussion and for sample minimal implementations of these support
subroutines.

   Alternative declarations of the mathematical functions, which exploit
specific machine capabilities to operate faster--but generally have
less error checking and may reflect additional limitations on some
machines--are available when you include `fastmath.h' instead of
`math.h'.

* Menu:

* version::	Version of library
* acos::	Arccosine
* acosh::	Inverse hyperbolic cosine
* asin::	Arcsine
* asinh::	Inverse hyperbolic sine
* atan::	Arctangent
* atan2::	Arctangent of y/x
* atanh::	Inverse hyperbolic tangent
* jN::	        Bessel functions  (jN, yN)
* cbrt::	Cube root
* copysign::	Sign of Y, magnitude of X
* cosh::	Hyperbolic cosine
* erf::		Error function  (erf, erfc)
* exp::		Exponential
* expm1::	Exponential of x, - 1
* fabs::	Absolute value (magnitude)
* floor::	Floor and ceiling  (floor, ceil)
* fmod::	Floating-point remainder (modulo)
* frexp::	Split floating-point number
* gamma::	Logarithmic gamma function
* hypot::	Distance from origin
* ilogb::	Get exponent
* infinity::	Floating infinity
* isnan::	Check type of number
* ldexp::	Load exponent
* log::		Natural logarithms
* log10::	Base 10 logarithms
* log1p::	Log of 1 + X
* matherr::	Modifiable math error handler
* modf::	Split fractional and integer parts
* nan::		Floating Not a Number
* nextafter::	Get next representable number
* pow::		X to the power Y
* remainder::	remainder of X divided by Y
* scalbn::	scalbn
* sin::		Sine or cosine (sin, cos)
* sinh::	Hyperbolic sine
* sqrt::	Positive square root
* tan::		Tangent
* tanh::	Hyperbolic tangent


File: libm.info,  Node: version,  Next: acos,  Up: Math

Version of library
==================

There are four different versions of the math library routines: IEEE,
POSIX, X/Open, or SVID.  The version may be selected at runtime by
setting the global variable `_LIB_VERSION', defined in `math.h'.  It
may be set to one of the following constants defined in `math.h':
`_IEEE_', `_POSIX_', `_XOPEN_', or `_SVID_'.  The `_LIB_VERSION'
variable is not specific to any thread, and changing it will affect all
threads.

   The versions of the library differ only in how errors are handled.

   In IEEE mode, the `matherr' function is never called, no warning
messages are printed, and `errno' is never set.

   In POSIX mode, `errno' is set correctly, but the `matherr' function
is never called and no warning messages are printed.

   In X/Open mode, `errno' is set correctly, and `matherr' is called,
but warning message are not printed.

   In SVID mode, functions which overflow return
3.40282346638528860e+38, the maximum single-precision floating-point
value, rather than infinity.  Also, `errno' is set correctly, `matherr'
is called, and, if `matherr' returns 0, warning messages are printed
for some errors.  For example, by default `log(-1.0)' writes this
message on standard error output:

     log: DOMAIN error

   The library is set to X/Open mode by default.


File: libm.info,  Node: acos,  Next: acosh,  Prev: version,  Up: Math

`acos', `acosf'--arc cosine
===========================

*Synopsis*
     #include <math.h>
     double acos(double X);
     float acosf(float X);
   *Description*
`acos' computes the inverse cosine (arc cosine) of the input value.
Arguments to `acos' must be in the range -1 to 1.

   `acosf' is identical to `acos', except that it performs its
calculations on `floats'.

*Returns*
`acos' and `acosf' return values in radians, in the range of 0 to pi.

If X is not between -1 and 1, the returned value is NaN (not a number)
the global variable `errno' is set to `EDOM', and a `DOMAIN error'
message is sent as standard error output.

   You can modify error handling for these functions using `matherr'.


File: libm.info,  Node: acosh,  Next: asin,  Prev: acos,  Up: Math

`acosh', `acoshf'--inverse hyperbolic cosine
============================================

*Synopsis*
     #include <math.h>
     double acosh(double X);
     float acoshf(float X);
   *Description*
`acosh' calculates the inverse hyperbolic cosine of X.  `acosh' is
defined as
      log(X + sqrt(X*X-1))

   X must be a number greater than or equal to 1.

   `acoshf' is identical, other than taking and returning floats.

*Returns*
`acosh' and `acoshf' return the calculated value.  If X less than 1,
the return value is NaN and `errno' is set to `EDOM'.

   You can change the error-handling behavior with the non-ANSI
`matherr' function.

*Portability*
Neither `acosh' nor `acoshf' are ANSI C.  They are not recommended for
portable programs.


File: libm.info,  Node: asin,  Next: asinh,  Prev: acosh,  Up: Math

`asin', `asinf'--arc sine
=========================

*Synopsis*
     #include <math.h>
     double asin(double X);
     float asinf(float X);
   *Description*
`asin' computes the inverse sine (arc sine) of the argument X.
Arguments to `asin' must be in the range -1 to 1.

   `asinf' is identical to `asin', other than taking and returning
floats.

   You can modify error handling for these routines using `matherr'.

*Returns*
`asin' returns values in radians, in the range of -pi/2 to pi/2.

If X is not in the range -1 to 1, `asin' and `asinf' return NaN (not a
number), set the global variable `errno' to `EDOM', and issue a `DOMAIN
error' message.

   You can change this error treatment using `matherr'.


File: libm.info,  Node: asinh,  Next: atan,  Prev: asin,  Up: Math

`asinh', `asinhf'--inverse hyperbolic sine
==========================================

*Synopsis*
     #include <math.h>
     double asinh(double X);
     float asinhf(float X);
   *Description*
`asinh' calculates the inverse hyperbolic sine of X.  `asinh' is
defined as
      sgn(X) * log(abs(X) + sqrt(1+X*X))

   `asinhf' is identical, other than taking and returning floats.

*Returns*
`asinh' and `asinhf' return the calculated value.

*Portability*
Neither `asinh' nor `asinhf' are ANSI C.


File: libm.info,  Node: atan,  Next: atan2,  Prev: asinh,  Up: Math

`atan', `atanf'--arc tangent
============================

*Synopsis*
     #include <math.h>
     double atan(double X);
     float atanf(float X);
   *Description*
`atan' computes the inverse tangent (arc tangent) of the input value.

   `atanf' is identical to `atan', save that it operates on `floats'.

*Returns*
`atan' returns a value in radians, in the range of -pi/2 to pi/2.

*Portability*
`atan' is ANSI C.  `atanf' is an extension.


File: libm.info,  Node: atan2,  Next: atanh,  Prev: atan,  Up: Math

`atan2', `atan2f'--arc tangent of y/x
=====================================

*Synopsis*
     #include <math.h>
     double atan2(double Y,double X);
     float atan2f(float Y,float X);
   *Description*
`atan2' computes the inverse tangent (arc tangent) of Y/X.  `atan2'
produces the correct result even for angles near pi/2 or -pi/2 (that
is, when X is near 0).

   `atan2f' is identical to `atan2', save that it takes and returns
`float'.

*Returns*
`atan2' and `atan2f' return a value in radians, in the range of -pi to
pi.

   If both X and Y are 0.0, `atan2' causes a `DOMAIN' error.

   You can modify error handling for these functions using `matherr'.

*Portability*
`atan2' is ANSI C.  `atan2f' is an extension.


File: libm.info,  Node: atanh,  Next: jN,  Prev: atan2,  Up: Math

`atanh', `atanhf'--inverse hyperbolic tangent
=============================================

*Synopsis*
     #include <math.h>
     double atanh(double X);
     float atanhf(float X);
   *Description*
`atanh' calculates the inverse hyperbolic tangent of X.

   `atanhf' is identical, other than taking and returning `float'
values.

*Returns*
`atanh' and `atanhf' return the calculated value.

   If
     X|
   is greater than 1, the global `errno' is set to `EDOM' and the
result is a NaN.  A `DOMAIN error' is reported.

   If
     X|
   is 1, the global `errno' is set to `EDOM'; and the result is
infinity with the same sign as `x'.  A `SING error' is reported.

   You can modify the error handling for these routines using `matherr'.

*Portability*
Neither `atanh' nor `atanhf' are ANSI C.


File: libm.info,  Node: jN,  Next: cbrt,  Prev: atanh,  Up: Math

`jN',`jNf',`yN',`yNf'--Bessel functions
=======================================

*Synopsis*
     #include <math.h>
     double j0(double X);
     float j0f(float X);
     double j1(double X);
     float j1f(float X);
     double jn(int N, double X);
     float jnf(int N, float X);
     double y0(double X);
     float y0f(float X);
     double y1(double X);
     float y1f(float X);
     double yn(int N, double X);
     float ynf(int N, float X);
   *Description*
The Bessel functions are a family of functions that solve the
differential equation
       2               2    2
      x  y'' + xy' + (x  - p )y  = 0
   These functions have many applications in engineering and physics.

   `jn' calculates the Bessel function of the first kind of order N.
`j0' and `j1' are special cases for order 0 and order 1 respectively.

   Similarly, `yn' calculates the Bessel function of the second kind of
order N, and `y0' and `y1' are special cases for order 0 and 1.

   `jnf', `j0f', `j1f', `ynf', `y0f', and `y1f' perform the same
calculations, but on `float' rather than `double' values.

*Returns*
The value of each Bessel function at X is returned.

*Portability*
None of the Bessel functions are in ANSI C.


File: libm.info,  Node: cosh,  Next: erf,  Prev: copysign,  Up: Math

`cosh', `coshf'--hyperbolic cosine
==================================

*Synopsis*
     #include <math.h>
     double cosh(double X);
     float coshf(float X)
   *Description*
`cosh' computes the hyperbolic cosine of the argument X.  `cosh(X)' is
defined as
      (exp(x) + exp(-x))/2

   Angles are specified in radians.  `coshf' is identical, save that it
takes and returns `float'.

*Returns*
The computed value is returned.  When the correct value would create an
overflow,  `cosh' returns the value `HUGE_VAL' with the appropriate
sign, and the global value `errno' is set to `ERANGE'.

   You can modify error handling for these functions using the function
`matherr'.

*Portability*
`cosh' is ANSI.  `coshf' is an extension.


File: libm.info,  Node: erf,  Next: exp,  Prev: cosh,  Up: Math

`erf', `erff', `erfc', `erfcf'--error function
==============================================

*Synopsis*
     #include <math.h>
     double erf(double X);
     float erff(float X);
     double erfc(double X);
     float erfcf(float X);
   *Description*
`erf' calculates an approximation to the "error function", which
estimates the probability that an observation will fall within X
standard deviations of the mean (assuming a normal distribution).

   `erfc' calculates the complementary probability; that is, `erfc(X)'
is `1 - erf(X)'.  `erfc' is computed directly, so that you can use it
to avoid the loss of precision that would result from subtracting large
probabilities (on large X) from 1.

   `erff' and `erfcf' differ from `erf' and `erfc' only in the argument
and result types.

*Returns*
For positive arguments, `erf' and all its variants return a
probability--a number between 0 and 1.

*Portability*
None of the variants of `erf' are ANSI C.


File: libm.info,  Node: exp,  Next: expm1,  Prev: erf,  Up: Math

`exp', `expf'--exponential
==========================

*Synopsis*
     #include <math.h>
     double exp(double X);
     float expf(float X);
   *Description*
`exp' and `expf' calculate the exponential of X, that is, e raised to
the power X (where e is the base of the natural system of logarithms,
approximately 2.71828).

   You can use the (non-ANSI) function `matherr' to specify error
handling for these functions.

*Returns*
On success, `exp' and `expf' return the calculated value.  If the
result underflows, the returned value is `0'.  If the result overflows,
the returned value is `HUGE_VAL'.  In either case, `errno' is set to
`ERANGE'.

*Portability*
`exp' is ANSI C.  `expf' is an extension.


File: libm.info,  Node: fabs,  Next: floor,  Prev: expm1,  Up: Math

`fabs', `fabsf'--absolute value (magnitude)
===========================================

*Synopsis*
     #include <math.h>
     double fabs(double X);
     float fabsf(float X);
   *Description*
`fabs' and `fabsf' calculate the absolute value (magnitude) of the
argument X, by direct manipulation of the bit representation of X.

*Returns*
The calculated value is returned.  No errors are detected.

*Portability*
`fabs' is ANSI.  `fabsf' is an extension.


File: libm.info,  Node: floor,  Next: fmod,  Prev: fabs,  Up: Math

`floor', `floorf', `ceil', `ceilf'--floor and ceiling
=====================================================

*Synopsis*
     #include <math.h>
     double floor(double X);
     float floorf(float X);
     double ceil(double X);
     float ceilf(float X);
   *Description*
`floor' and `floorf' find the nearest integer less than or equal to X.
`ceil' and `ceilf' find the nearest integer greater than or equal to X.

*Returns*
`floor' and `ceil' return the integer result as a double.  `floorf' and
`ceilf' return the integer result as a float.

*Portability*
`floor' and `ceil' are ANSI.  `floorf' and `ceilf' are extensions.


File: libm.info,  Node: fmod,  Next: frexp,  Prev: floor,  Up: Math

`fmod', `fmodf'--floating-point remainder (modulo)
==================================================

*Synopsis*
     #include <math.h>
     double fmod(double X, double Y)
     float fmodf(float X, float Y)
   *Description*
The `fmod' and `fmodf' functions compute the floating-point remainder
of X/Y (X modulo Y).

*Returns*
The `fmod' function returns the value X-I*Y, for the largest integer I
such that, if Y is nonzero, the result has the same sign as X and
magnitude less than the magnitude of Y.

   `fmod(X,0)' returns NaN, and sets `errno' to `EDOM'.

   You can modify error treatment for these functions using `matherr'.

*Portability*
`fmod' is ANSI C. `fmodf' is an extension.


File: libm.info,  Node: frexp,  Next: gamma,  Prev: fmod,  Up: Math

`frexp', `frexpf'--split floating-point number
==============================================

*Synopsis*
     #include <math.h>
     double frexp(double VAL, int *EXP);
     float frexpf(float VAL, int *EXP);
   *Description*
All nonzero, normal numbers can be described as M * 2**P.  `frexp'
represents the double VAL as a mantissa M and a power of two P. The
resulting mantissa will always be greater than or equal to `0.5', and
less than `1.0' (as long as VAL is nonzero). The power of two will be
stored in `*'EXP.

   M and P are calculated so that VAL is M times `2' to the power P.

   `frexpf' is identical, other than taking and returning floats rather
than doubles.

*Returns*
`frexp' returns the mantissa M. If VAL is `0', infinity, or Nan,
`frexp' will set `*'EXP to `0' and return VAL.

*Portability*
`frexp' is ANSI.  `frexpf' is an extension.


File: libm.info,  Node: gamma,  Next: hypot,  Prev: frexp,  Up: Math

`gamma', `gammaf', `lgamma', `lgammaf', `gamma_r',
==================================================

*Synopsis*
     #include <math.h>
     double gamma(double X);
     float gammaf(float X);
     double lgamma(double X);
     float lgammaf(float X);
     double gamma_r(double X, int *SIGNGAMP);
     float gammaf_r(float X, int *SIGNGAMP);
     double lgamma_r(double X, int *SIGNGAMP);
     float lgammaf_r(float X, int *SIGNGAMP);
   *Description*
`gamma' calculates the natural logarithm of the gamma function of X.
The gamma function (`exp(gamma(X))') is a generalization of factorial,
and retains the property that `exp(gamma(N))' is equivalent to
`N*exp(gamma(N-1))'.  Accordingly, the results of the gamma function
itself grow very quickly.  `gamma' is defined as the natural log of the
gamma function, rather than the gamma function itself, to extend the
useful range of results representable.

   The sign of the result is returned in the global variable `signgam',
which is declared in math.h.

   `gammaf' performs the same calculation as `gamma', but uses and
returns `float' values.

   `lgamma' and `lgammaf' are alternate names for `gamma' and `gammaf'.
The use of `lgamma' instead of `gamma' is a reminder that these
functions compute the log of the gamma function, rather than the gamma
function itself.

   The functions `gamma_r', `gammaf_r', `lgamma_r', and `lgammaf_r' are
just like `gamma', `gammaf', `lgamma', and `lgammaf', respectively, but
take an additional argument.  This additional argument is a pointer to
an integer.  This additional argument is used to return the sign of the
result, and the global variable `signgam' is not used.  These functions
may be used for reentrant calls (but they will still set the global
variable `errno' if an error occurs).

*Returns*
Normally, the computed result is returned.

   When X is a nonpositive integer, `gamma' returns `HUGE_VAL' and
`errno' is set to `EDOM'.  If the result overflows, `gamma' returns
`HUGE_VAL' and `errno' is set to `ERANGE'.

   You can modify this error treatment using `matherr'.

*Portability*
Neither `gamma' nor `gammaf' is ANSI C.

File: libm.info,  Node: hypot,  Next: ilogb,  Prev: gamma,  Up: Math

`hypot', `hypotf'--distance from origin
=======================================

*Synopsis*
     #include <math.h>
     double hypot(double X, double Y);
     float hypotf(float X, float Y);
   *Description*
`hypot' calculates the Euclidean distance `sqrt(X*X + Y*Y)' between the
origin (0,0) and a point represented by the Cartesian coordinates
(X,Y).  `hypotf' differs only in the type of its arguments and result.

*Returns*
Normally, the distance value is returned.  On overflow, `hypot' returns
`HUGE_VAL' and sets `errno' to `ERANGE'.

   You can change the error treatment with `matherr'.

*Portability*
`hypot' and `hypotf' are not ANSI C.

File: libm.info,  Node: isnan,  Next: ldexp,  Prev: infinity,  Up: Math

`isnan',`isnanf',`isinf',`isinff',`finite',`finitef'--test for exceptional numbers
==================================================================================

*Synopsis*
     #include <ieeefp.h>
     int isnan(double ARG);
     int isinf(double ARG);
     int finite(double ARG);
     int isnanf(float ARG);
     int isinff(float ARG);
     int finitef(float ARG);
   *Description*
These functions provide information on the floating-point argument
supplied.

   There are five major number formats -
`zero'
     a number which contains all zero bits.

`subnormal'
     Is used to represent  number with a zero exponent, but a nonzero
     fraction.

`normal'
     A number with an exponent, and a fraction

`infinity'
     A number with an all 1's exponent and a zero fraction.

`NAN'
     A number with an all 1's exponent and a nonzero fraction.


   `isnan' returns 1 if the argument is a nan. `isinf' returns 1 if the
argument is infinity.  `finite' returns 1 if the argument is zero,
subnormal or normal.  The `isnanf', `isinff' and `finitef' perform the
same operations as their `isnan', `isinf' and `finite' counterparts,
but on single-precision floating-point numbers.


File: libm.info,  Node: ldexp,  Next: log,  Prev: isnan,  Up: Math

`ldexp', `ldexpf'--load exponent
================================

*Synopsis*
     #include <math.h>
     double ldexp(double VAL, int EXP);
     float ldexpf(float VAL, int EXP);
   *Description*
`ldexp' calculates the value VAL times 2 to the power EXP.  `ldexpf' is
identical, save that it takes and returns `float' rather than `double'
values.

*Returns*
`ldexp' returns the calculated value.

   Underflow and overflow both set `errno' to `ERANGE'.  On underflow,
`ldexp' and `ldexpf' return 0.0.  On overflow, `ldexp' returns plus or
minus `HUGE_VAL'.

*Portability*
`ldexp' is ANSI, `ldexpf' is an extension.


File: libm.info,  Node: log,  Next: log10,  Prev: ldexp,  Up: Math

`log', `logf'--natural logarithms
=================================

*Synopsis*
     #include <math.h>
     double log(double X);
     float logf(float X);
   *Description*
Return the natural logarithm of X, that is, its logarithm base e (where
e is the base of the natural system of logarithms, 2.71828...).  `log'
and `logf' are identical save for the return and argument types.

   You can use the (non-ANSI) function `matherr' to specify error
handling for these functions.

*Returns*
Normally, returns the calculated value.  When X is zero, the returned
value is `-HUGE_VAL' and `errno' is set to `ERANGE'.  When X is
negative, the returned value is `-HUGE_VAL' and `errno' is set to
`EDOM'.  You can control the error behavior via `matherr'.

*Portability*
`log' is ANSI, `logf' is an extension.


File: libm.info,  Node: log10,  Next: log1p,  Prev: log,  Up: Math

`log10', `log10f'--base 10 logarithms
=====================================

*Synopsis*
     #include <math.h>
     double log10(double X);
     float log10f(float X);
   *Description*
`log10' returns the base 10 logarithm of X.  It is implemented as
`log(X) / log(10)'.

   `log10f' is identical, save that it takes and returns `float' values.

*Returns*
`log10' and `log10f' return the calculated value.

   See the description of `log' for information on errors.

*Portability*
`log10' is ANSI C.  `log10f' is an extension.


File: libm.info,  Node: pow,  Next: remainder,  Prev: nextafter,  Up: Math

`pow', `powf'--x to the power y
===============================

*Synopsis*
     #include <math.h>
     double pow(double X, double Y);
     float pow(float X, float Y);
   *Description*
`pow' and `powf' calculate X raised to the exponent Y.

*Returns*
On success, `pow' and `powf' return the value calculated.

   When the argument values would produce overflow, `pow' returns
`HUGE_VAL' and set `errno' to `ERANGE'.  If the argument X passed to
`pow' or `powf' is a negative noninteger, and Y is also not an integer,
then `errno' is set to `EDOM'.  If X and Y are both 0, then `pow' and
`powf' return `1'.

   You can modify error handling for these functions using `matherr'.

*Portability*
`pow' is ANSI C. `powf' is an extension.

File: libm.info,  Node: remainder,  Next: scalbn,  Prev: pow,  Up: Math

`remainder', `remainderf'--round and  remainder
===============================================

*Synopsis*
     #include <math.h>
     double remainder(double X, double Y);
     float remainderf(float X, float Y);
   *Description*
`remainder' and `remainderf' find the remainder of X/Y; this value is
in the range -Y/2 .. +Y/2.

*Returns*
`remainder' returns the integer result as a double.

*Portability*
`remainder' is a System V release 4.  `remainderf' is an extension.


File: libm.info,  Node: sqrt,  Next: tan,  Prev: sinh,  Up: Math

`sqrt', `sqrtf'--positive square root
=====================================

*Synopsis*
     #include <math.h>
     double sqrt(double X);
     float  sqrtf(float X);
   *Description*
`sqrt' computes the positive square root of the argument.  You can
modify error handling for this function with `matherr'.

*Returns*
On success, the square root is returned. If X is real and positive,
then the result is positive.  If X is real and negative, the global
value `errno' is set to `EDOM' (domain error).

*Portability*
`sqrt' is ANSI C.  `sqrtf' is an extension.


File: libm.info,  Node: sin,  Next: sinh,  Prev: scalbn,  Up: Math

`sin', `sinf', `cos', `cosf'--sine or cosine
============================================

*Synopsis*
     #include <math.h>
     double sin(double X);
     float  sinf(float X);
     double cos(double X);
     float cosf(float X);
   *Description*
`sin' and `cos' compute (respectively) the sine and cosine of the
argument X.  Angles are specified in radians.

   `sinf' and `cosf' are identical, save that they take and return
`float' values.

*Returns*
The sine or cosine of X is returned.

*Portability*
`sin' and `cos' are ANSI C.  `sinf' and `cosf' are extensions.


File: libm.info,  Node: sinh,  Next: sqrt,  Prev: sin,  Up: Math

`sinh', `sinhf'--hyperbolic sine
================================

*Synopsis*
     #include <math.h>
     double sinh(double X);
     float  sinhf(float X);
   *Description*
`sinh' computes the hyperbolic sine of the argument X.  Angles are
specified in radians.   `sinh'(X) is defined as
      (exp(X) - exp(-X))/2

   `sinhf' is identical, save that it takes and returns `float' values.

*Returns*
The hyperbolic sine of X is returned.

   When the correct result is too large to be representable (an
overflow),  `sinh' returns `HUGE_VAL' with the appropriate sign, and
sets the global value `errno' to `ERANGE'.

   You can modify error handling for these functions with `matherr'.

*Portability*
`sinh' is ANSI C.  `sinhf' is an extension.


File: libm.info,  Node: tan,  Next: tanh,  Prev: sqrt,  Up: Math

`tan', `tanf'--tangent
======================

*Synopsis*
     #include <math.h>
     double tan(double X);
     float tanf(float X);
   *Description*
`tan' computes the tangent of the argument X.  Angles are specified in
radians.

   `tanf' is identical, save that it takes and returns `float' values.

*Returns*
The tangent of X is returned.

*Portability*
`tan' is ANSI. `tanf' is an extension.


File: libm.info,  Node: tanh,  Prev: tan,  Up: Math

`tanh', `tanhf'--hyperbolic tangent
===================================

*Synopsis*
     #include <math.h>
     double tanh(double X);
     float tanhf(float X);
   *Description*
`tanh' computes the hyperbolic tangent of the argument X.  Angles are
specified in radians.

   `tanh(X)' is defined as
      sinh(X)/cosh(X)
   `tanhf' is identical, save that it takes and returns `float' values.

*Returns*
The hyperbolic tangent of X is returned.

*Portability*
`tanh' is ANSI C.  `tanhf' is an extension.


File: libm.info,  Node: cbrt,  Next: copysign,  Prev: jN,  Up: Math

`cbrt', `cbrtf'--cube root
==========================

*Synopsis*
     #include <math.h>
     double cbrt(double X);
     float  cbrtf(float X);
   *Description*
`cbrt' computes the cube root of the argument.

*Returns*
The cube root is returned.

*Portability*
`cbrt' is in System V release 4.  `cbrtf' is an extension.


File: libm.info,  Node: copysign,  Next: cosh,  Prev: cbrt,  Up: Math

`copysign', `copysignf'--sign of Y, magnitude of X
==================================================

*Synopsis*
     #include <math.h>
     double copysign (double X, double Y);
     float copysignf (float X, float Y);
   *Description*
`copysign' constructs a number with the magnitude (absolute value) of
its first argument, X, and the sign of its second argument, Y.

   `copysignf' does the same thing; the two functions differ only in
the type of their arguments and result.

*Returns*
`copysign' returns a `double' with the magnitude of X and the sign of Y.
`copysignf' returns a `float' with the magnitude of X and the sign of Y.

*Portability*
`copysign' is not required by either ANSI C or the System V Interface
Definition (Issue 2).


File: libm.info,  Node: expm1,  Next: fabs,  Prev: exp,  Up: Math

`expm1', `expm1f'--exponential minus 1
======================================

*Synopsis*
     #include <math.h>
     double expm1(double X);
     float expm1f(float X);
   *Description*
`expm1' and `expm1f' calculate the exponential of X and subtract 1,
that is, e raised to the power X minus 1 (where e is the base of the
natural system of logarithms, approximately 2.71828).  The result is
accurate even for small values of X, where using `exp(X)-1' would lose
many significant digits.

*Returns*
e raised to the power X, minus 1.

*Portability*
Neither `expm1' nor `expm1f' is required by ANSI C or by the System V
Interface Definition (Issue 2).


File: libm.info,  Node: ilogb,  Next: infinity,  Prev: hypot,  Up: Math

`ilogb', `ilogbf'--get exponent of floating-point number
========================================================

*Synopsis*
     #include <math.h>
     int ilogb(double VAL);
     int ilogbf(float VAL);
   *Description*
All nonzero, normal numbers can be described as M * 2**P.  `ilogb' and
`ilogbf' examine the argument VAL, and return P.  The functions `frexp'
and `frexpf' are similar to `ilogb' and `ilogbf', but also return M.

*Returns*
`ilogb' and `ilogbf' return the power of two used to form the
floating-point argument.  If VAL is `0', they return `- INT_MAX'
(`INT_MAX' is defined in limits.h).  If VAL is infinite, or NaN, they
return `INT_MAX'.

*Portability*
Neither `ilogb' nor `ilogbf' is required by ANSI C or by the System V
Interface Definition (Issue 2).

File: libm.info,  Node: infinity,  Next: isnan,  Prev: ilogb,  Up: Math

`infinity', `infinityf'--representation of infinity
===================================================

*Synopsis*
     #include <math.h>
     double infinity(void);
     float infinityf(void);
   *Description*
`infinity' and `infinityf' return the special number IEEE infinity in
double- and single-precision arithmetic respectively.


File: libm.info,  Node: log1p,  Next: matherr,  Prev: log10,  Up: Math

`log1p', `log1pf'--log of `1 + X'
=================================

*Synopsis*
     #include <math.h>
     double log1p(double X);
     float log1pf(float X);
   *Description*
`log1p' calculates the natural logarithm of `1+X'.  You can use `log1p'
rather than ``log(1+X)'' for greater precision when X is very small.

   `log1pf' calculates the same thing, but accepts and returns `float'
values rather than `double'.

*Returns*
`log1p' returns a `double', the natural log of `1+X'.  `log1pf' returns
a `float', the natural log of `1+X'.

*Portability*
Neither `log1p' nor `log1pf' is required by ANSI C or by the System V
Interface Definition (Issue 2).


File: libm.info,  Node: matherr,  Next: modf,  Prev: log1p,  Up: Math

`matherr'--modifiable math error handler
========================================

*Synopsis*
     #include <math.h>
     int matherr(struct exception *E);
   *Description*
`matherr' is called whenever a math library function generates an error.
You can replace `matherr' by your own subroutine to customize error
treatment.  The customized `matherr' must return 0 if it fails to
resolve the error, and non-zero if the error is resolved.

   When `matherr' returns a nonzero value, no error message is printed
and the value of `errno' is not modified.  You can accomplish either or
both of these things in your own `matherr' using the information passed
in the structure `*E'.

   This is the `exception' structure (defined in ``math.h''):
     	struct exception {
     	        int type;
     	        char *name;
     	        double arg1, arg2, retval;
     		int err;
     	};

   The members of the exception structure have the following meanings:
`type'
     The type of mathematical error that occured; macros encoding error
     types are also defined in ``math.h''.

`name'
     a pointer to a null-terminated string holding the name of the math
     library function where the error occurred.

`arg1, arg2'
     The arguments which caused the error.

`retval'
     The error return value (what the calling function will return).

`err'
     If set to be non-zero, this is the new value assigned to `errno'.

   The error types defined in ``math.h'' represent possible mathematical
errors as follows:

`DOMAIN'
     An argument was not in the domain of the function; e.g.
     `log(-1.0)'.

`SING'
     The requested calculation would result in a singularity; e.g.
     `pow(0.0,-2.0)'

`OVERFLOW'
     A calculation would produce a result too large to represent; e.g.
     `exp(1000.0)'.

`UNDERFLOW'
     A calculation would produce a result too small to represent; e.g.
     `exp(-1000.0)'.

`TLOSS'
     Total loss of precision.  The result would have no significant
     digits; e.g. `sin(10e70)'.

`PLOSS'
     Partial loss of precision.

*Returns*
The library definition for `matherr' returns `0' in all cases.

   You can change the calling function's result from a customized
`matherr' by modifying `e->retval', which propagates backs to the
caller.

   If `matherr' returns `0' (indicating that it was not able to resolve
the error) the caller sets `errno' to an appropriate value, and prints
an error message.

*Portability*
`matherr' is not ANSI C.


File: libm.info,  Node: modf,  Next: nan,  Prev: matherr,  Up: Math

`modf', `modff'--split fractional and integer parts
===================================================

*Synopsis*
     #include <math.h>
     double modf(double VAL, double *IPART);
     float modff(float VAL, float *IPART);
   *Description*
`modf' splits the double VAL apart into an integer part and a
fractional part, returning the fractional part and storing the integer
part in `*IPART'.  No rounding whatsoever is done; the sum of the
integer and fractional parts is guaranteed to be exactly  equal to VAL.
 That is, if . REALPART = modf(VAL, &INTPART); then
``REALPART+INTPART'' is the same as VAL.  `modff' is identical, save
that it takes and returns `float' rather than `double' values.

*Returns*
The fractional part is returned.  Each result has the same sign as the
supplied argument VAL.

*Portability*
`modf' is ANSI C. `modff' is an extension.


File: libm.info,  Node: nan,  Next: nextafter,  Prev: modf,  Up: Math

`nan', `nanf'--representation of "Not a Number"
===============================================

*Synopsis*
     #include <math.h>
     double nan(const char *);
     float nanf(const char *);
   *Description*
`nan' and `nanf' return an IEEE NaN (Not a Number) in double- and
single-precision arithmetic respectively.  The argument is currently
disregarded.


File: libm.info,  Node: nextafter,  Next: pow,  Prev: nan,  Up: Math

`nextafter', `nextafterf'--get next number
==========================================

*Synopsis*
     #include <math.h>
     double nextafter(double VAL, double DIR);
     float nextafterf(float VAL, float DIR);
   *Description*
`nextafter' returns the double-precision floating-point number closest
to VAL in the direction toward DIR.  `nextafterf' performs the same
operation in single precision.  For example, `nextafter(0.0,1.0)'
returns the smallest positive number which is representable in double
precision.

*Returns*
Returns the next closest number to VAL in the direction toward DIR.

*Portability*
Neither `nextafter' nor `nextafterf' is required by ANSI C or by the
System V Interface Definition (Issue 2).


File: libm.info,  Node: scalbn,  Next: sin,  Prev: remainder,  Up: Math

`scalbn', `scalbnf'--scale by power of two
==========================================

*Synopsis*
     #include <math.h>
     double scalbn(double X, int Y);
     float scalbnf(float X, int Y);
   *Description*
`scalbn' and `scalbnf' scale X by N, returning X times 2 to the power
N.  The result is computed by manipulating the exponent, rather than by
actually performing an exponentiation or multiplication.

*Returns*
X times 2 to the power N.

*Portability*
Neither `scalbn' nor `scalbnf' is required by ANSI C or by the System V
Interface Definition (Issue 2).


File: libm.info,  Node: Reentrancy,  Next: Index,  Prev: Math,  Up: Top

Reentrancy Properties of `libm'
*******************************

When a libm function detects an exceptional case, `errno' may be set,
the `matherr' function may be called, and a error message may be
written to the standard error stream.  This behavior may not be
reentrant.

   With reentrant C libraries like the Red Hat newlib C library,
`errno' is a macro which expands to the per-thread error value.  This
makes it thread safe.

   When the user provides his own `matherr' function it must be
reentrant for the math library as a whole to be reentrant.

   In normal debugged programs, there are usually no math subroutine
errors--and therefore no assignments to `errno' and no `matherr' calls;
in that situation, the math functions behave reentrantly.


File: libm.info,  Node: Index,  Prev: Reentrancy,  Up: Top

Index
*****

* Menu:

* acos:                                  acos.
* acosf:                                 acos.
* acosh:                                 acosh.
* acoshf:                                acosh.
* asin:                                  asin.
* asinf:                                 asin.
* asinh:                                 asinh.
* asinhf:                                asinh.
* atan:                                  atan.
* atan2:                                 atan2.
* atan2f:                                atan2.
* atanf:                                 atan.
* atanh:                                 atanh.
* atanhf:                                atanh.
* cbrt:                                  cbrt.
* cbrtf:                                 cbrt.
* ceil:                                  floor.
* ceilf:                                 floor.
* copysign:                              copysign.
* copysignf:                             copysign.
* cos:                                   sin.
* cosf:                                  sin.
* erf:                                   erf.
* erfc:                                  erf.
* erfcf:                                 erf.
* erff:                                  erf.
* exp:                                   exp.
* expf:                                  exp.
* expm1:                                 expm1.
* expm1f:                                expm1.
* fabs:                                  fabs.
* fabsf:                                 fabs.
* finite:                                isnan.
* finitef:                               isnan.
* floor:                                 floor.
* floorf:                                floor.
* fmod:                                  fmod.
* fmodf:                                 fmod.
* frexp:                                 frexp.
* frexpf:                                frexp.
* gamma:                                 gamma.
* gamma_r:                               gamma.
* gammaf:                                gamma.
* gammaf_r:                              gamma.
* hypot:                                 hypot.
* hypotf:                                hypot.
* ilogb:                                 ilogb.
* ilogbf:                                ilogb.
* infinity:                              infinity.
* infinityf:                             infinity.
* isinf:                                 isnan.
* isinff:                                isnan.
* isnan:                                 isnan.
* isnanf:                                isnan.
* j0:                                    jN.
* j0f:                                   jN.
* j1:                                    jN.
* j1f:                                   jN.
* jn:                                    jN.
* jnf:                                   jN.
* ldexp:                                 ldexp.
* ldexpf:                                ldexp.
* lgamma:                                gamma.
* lgamma_r:                              gamma.
* lgammaf:                               gamma.
* lgammaf_r:                             gamma.
* log:                                   log.
* log10:                                 log10.
* log10f:                                log10.
* log1p:                                 log1p.
* log1pf:                                log1p.
* logf:                                  log.
* matherr:                               matherr.
* matherr and reentrancy:                Reentrancy.
* modf:                                  modf.
* modff:                                 modf.
* nan:                                   nan.
* nanf:                                  nan.
* nextafter:                             nextafter.
* nextafterf:                            nextafter.
* OS stubs:                              Math.
* pow:                                   pow.
* powf:                                  pow.
* reentrancy:                            Reentrancy.
* remainder:                             remainder.
* remainderf:                            remainder.
* scalbn:                                scalbn.
* scalbnf:                               scalbn.
* sin:                                   sin.
* sinf:                                  sin.
* sinh:                                  sinh.
* sinhf:                                 sinh.
* sqrt:                                  sqrt.
* sqrtf:                                 sqrt.
* stubs:                                 Math.
* support subroutines:                   Math.
* system calls:                          Math.
* tan:                                   tan.
* tanf:                                  tan.
* tanh:                                  tanh.
* tanhf:                                 tanh.
* y0:                                    jN.
* y0f:                                   jN.
* y1:                                    jN.
* y1f:                                   jN.
* yn:                                    jN.
* ynf:                                   jN.



Tag Table:
Node: Top1215
Node: Math1431
Node: version4061
Node: acos5433
Node: acosh6211
Node: asin7028
Node: asinh7811
Node: atan8378
Node: atan28892
Node: atanh9684
Node: jN10550
Node: cosh11829
Node: erf12634
Node: exp13659
Node: fabs14433
Node: floor14961
Node: fmod15658
Node: frexp16422
Node: gamma17353
Node: hypot19561
Node: isnan20281
Node: ldexp21543
Node: log22230
Node: log1023103
Node: pow23701
Node: remainder24514
Node: sqrt25065
Node: sin25694
Node: sinh26336
Node: tan27149
Node: tanh27616
Node: cbrt28176
Node: copysign28569
Node: expm129388
Node: ilogb30109
Node: infinity30961
Node: log1p31373
Node: matherr32104
Node: modf34648
Node: nan35582
Node: nextafter36014
Node: scalbn36807
Node: Reentrancy37449
Node: Index38282

End Tag Table
