Network Working Group                                        R. Fielding
Request for Comments: 1808                                     UC Irvine
Category: Standards Track                                      June 1995


                   Relative Uniform Resource Locators

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Abstract

   A Uniform Resource Locator (URL) is a compact representation of the
   location and access method for a resource available via the Internet.
   When embedded within a base document, a URL in its absolute form may
   contain a great deal of information which is already known from the
   context of that base document's retrieval, including the scheme,
   network location, and parts of the url-path.  In situations where the
   base URL is well-defined and known to the parser (human or machine),
   it is useful to be able to embed URL references which inherit that
   context rather than re-specifying it in every instance.  This
   document defines the syntax and semantics for such Relative Uniform
   Resource Locators.

1.  Introduction

   This document describes the syntax and semantics for "relative"
   Uniform Resource Locators (relative URLs): a compact representation
   of the location of a resource relative to an absolute base URL.  It
   is a companion to RFC 1738, "Uniform Resource Locators (URL)" [2],
   which specifies the syntax and semantics of absolute URLs.

   A common use for Uniform Resource Locators is to embed them within a
   document (referred to as the "base" document) for the purpose of
   identifying other Internet-accessible resources.  For example, in
   hypertext documents, URLs can be used as the identifiers for
   hypertext link destinations.

   Absolute URLs contain a great deal of information which may already
   be known from the context of the base document's retrieval, including
   the scheme, network location, and parts of the URL path.  In
   situations where the base URL is well-defined and known, it is useful
   to be able to embed a URL reference which inherits that context



Fielding                    Standards Track                     [Page 1]


RFC 1808           Relative Uniform Resource Locators          June 1995


   rather than re-specifying it within each instance.  Relative URLs can
   also be used within data-entry dialogs to decrease the number of
   characters necessary to describe a location.

   In addition, it is often the case that a group or "tree" of documents
   has been constructed to serve a common purpose; the vast majority of
   URLs in these documents point to locations within the tree rather
   than outside of it.  Similarly, documents located at a particular
   Internet site are much more likely to refer to other resources at
   that site than to resources at remote sites.

   Relative addressing of URLs allows document trees to be partially
   independent of their location and access scheme.  For instance, it is
   possible for a single set of hypertext documents to be simultaneously
   accessible and traversable via each of the "file", "http", and "ftp"
   schemes if the documents refer to each other using relative URLs.
   Furthermore, document trees can be moved, as a whole, without
   changing any of the embedded URLs.  Experience within the World-Wide
   Web has demonstrated that the ability to perform relative referencing
   is necessary for the long-term usability of embedded URLs.

2.  Relative URL Syntax

   The syntax for relative URLs is a shortened form of that for absolute
   URLs [2], where some prefix of the URL is missing and certain path
   components ("." and "..") have a special meaning when interpreting a
   relative path.  Because a relative URL may appear in any context that
   could hold an absolute URL, systems that support relative URLs must
   be able to recognize them as part of the URL parsing process.

   Although this document does not seek to define the overall URL
   syntax, some discussion of it is necessary in order to describe the
   parsing of relative URLs.  In particular, base documents can only
   make use of relative URLs when their base URL fits within the
   generic-RL syntax described below.  Although some URL schemes do not
   require this generic-RL syntax, it is assumed that any document which
   contains a relative reference does have a base URL that obeys the
   syntax.  In other words, relative URLs cannot be used within
   documents that have unsuitable base URLs.

2.1.  URL Syntactic Components

   The URL syntax is dependent upon the scheme.  Some schemes use
   reserved characters like "?" and ";" to indicate special components,
   while others just consider them to be part of the path.  However,
   there is enough uniformity in the use of URLs to allow a parser to
   resolve relative URLs based upon a single, generic-RL syntax.  This
   generic-RL syntax consists of six components:



Fielding                    Standards Track                     [Page 2]


RFC 1808           Relative Uniform Resource Locators          June 1995


      <scheme>://<net_loc>/<path>;<params>?<query>#<fragment>

   each of which, except <scheme>, may be absent from a particular URL.
   These components are defined as follows (a complete BNF is provided
   in Section 2.2):

      scheme ":"   ::= scheme name, as per Section 2.1 of RFC 1738 [2].

      "//" net_loc ::= network location and login information, as per
                       Section 3.1 of RFC 1738 [2].

      "/" path     ::= URL path, as per Section 3.1 of RFC 1738 [2].

      ";" params   ::= object parameters (e.g., ";type=a" as in
                       Section 3.2.2 of RFC 1738 [2]).

      "?" query    ::= query information, as per Section 3.3 of
                       RFC 1738 [2].

      "#" fragment ::= fragment identifier.

   Note that the fragment identifier (and the "#" that precedes it) is
   not considered part of the URL.  However, since it is commonly used
   within the same string context as a URL, a parser must be able to
   recognize the fragment when it is present and set it aside as part of
   the parsing process.

   The order of the components is important.  If both <params> and
   <query> are present, the <query> information must occur after the
   <params>.

2.2.  BNF for Relative URLs

   This is a BNF-like description of the Relative Uniform Resource
   Locator syntax, using the conventions of RFC 822 [5], except that "|"
   is used to designate alternatives.  Briefly, literals are quoted with
   "", parentheses "(" and ")" are used to group elements, optional
   elements are enclosed in [brackets], and elements may be preceded
   with <n>* to designate n or more repetitions of the following
   element; n defaults to 0.

   This BNF also describes the generic-RL syntax for valid base URLs.
   Note that this differs from the URL syntax defined in RFC 1738 [2] in
   that all schemes are required to use a single set of reserved
   characters and use them consistently within the major URL components.






Fielding                    Standards Track                     [Page 3]


RFC 1808           Relative Uniform Resource Locators          June 1995


   URL         = ( absoluteURL | relativeURL ) [ "#" fragment ]

   absoluteURL = generic-RL | ( scheme ":" *( uchar | reserved ) )

   generic-RL  = scheme ":" relativeURL

   relativeURL = net_path | abs_path | rel_path

   net_path    = "//" net_loc [ abs_path ]
   abs_path    = "/"  rel_path
   rel_path    = [ path ] [ ";" params ] [ "?" query ]

   path        = fsegment *( "/" segment )
   fsegment    = 1*pchar
   segment     =  *pchar

   params      = param *( ";" param )
   param       = *( pchar | "/" )

   scheme      = 1*( alpha | digit | "+" | "-" | "." )
   net_loc     =  *( pchar | ";" | "?" )
   query       =  *( uchar | reserved )
   fragment    =  *( uchar | reserved )

   pchar       = uchar | ":" | "@" | "&" | "="
   uchar       = unreserved | escape
   unreserved  = alpha | digit | safe | extra

   escape      = "%" hex hex
   hex         = digit | "A" | "B" | "C" | "D" | "E" | "F" |
                         "a" | "b" | "c" | "d" | "e" | "f"

   alpha       = lowalpha | hialpha
   lowalpha    = "a" | "b" | "c" | "d" | "e" | "f" | "g" | "h" | "i" |
                 "j" | "k" | "l" | "m" | "n" | "o" | "p" | "q" | "r" |
                 "s" | "t" | "u" | "v" | "w" | "x" | "y" | "z"
   hialpha     = "A" | "B" | "C" | "D" | "E" | "F" | "G" | "H" | "I" |
                 "J" | "K" | "L" | "M" | "N" | "O" | "P" | "Q" | "R" |
                 "S" | "T" | "U" | "V" | "W" | "X" | "Y" | "Z"

   digit       = "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" |
                 "8" | "9"

   safe        = "$" | "-" | "_" | "." | "+"
   extra       = "!" | "*" | "'" | "(" | ")" | ","
   national    = "{" | "}" | "|" | "\" | "^" | "~" | "[" | "]" | "`"
   reserved    = ";" | "/" | "?" | ":" | "@" | "&" | "="
   punctuation = "<" | ">" | "#" | "%" | <">



Fielding                    Standards Track                     [Page 4]


RFC 1808           Relative Uniform Resource Locators          June 1995


2.3.  Specific Schemes and their Syntactic Categories

   Each URL scheme has its own rules regarding the presence or absence
   of the syntactic components described in Sections 2.1 and 2.2.  In
   addition, some schemes are never appropriate for use with relative
   URLs.  However, since relative URLs will only be used within contexts
   in which they are useful, these scheme-specific differences can be
   ignored by the resolution process.

   Within this section, we include as examples only those schemes that
   have a defined URL syntax in RFC 1738 [2].  The following schemes are
   never used with relative URLs:

      mailto     Electronic Mail
      news       USENET news
      telnet     TELNET Protocol for Interactive Sessions

   Some URL schemes allow the use of reserved characters for purposes
   outside the generic-RL syntax given above.  However, such use is
   rare.  Relative URLs can be used with these schemes whenever the
   applicable base URL follows the generic-RL syntax.

      gopher     Gopher and Gopher+ Protocols
      prospero   Prospero Directory Service
      wais       Wide Area Information Servers Protocol

   Users of gopher URLs should note that gopher-type information is
   almost always included at the beginning of what would be the
   generic-RL path.  If present, this type information prevents
   relative-path references to documents with differing gopher-types.

   Finally, the following schemes can always be parsed using the
   generic-RL syntax.  This does not necessarily imply that relative
   URLs will be useful with these schemes -- that decision is left to
   the system implementation and the author of the base document.

      file       Host-specific Files
      ftp        File Transfer Protocol
      http       Hypertext Transfer Protocol
      nntp       USENET news using NNTP access

   NOTE: Section 5 of RFC 1738 specifies that the question-mark
         character ("?") is allowed in an ftp or file path segment.
         However, this is not true in practice and is believed to be an
         error in the RFC.  Similarly, RFC 1738 allows the reserved
         character semicolon (";") within an http path segment, but does
         not define its semantics; the correct semantics are as defined
         by this document for <params>.



Fielding                    Standards Track                     [Page 5]


RFC 1808           Relative Uniform Resource Locators          June 1995


   We recommend that new schemes be designed to be parsable via the
   generic-RL syntax if they are intended to be used with relative URLs.
   A description of the allowed relative forms should be included when a
   new scheme is registered, as per Section 4 of RFC 1738 [2].

2.4.  Parsing a URL

   An accepted method for parsing URLs is useful to clarify the
   generic-RL syntax of Section 2.2 and to describe the algorithm for
   resolving relative URLs presented in Section 4.  This section
   describes the parsing rules for breaking down a URL (relative or
   absolute) into the component parts described in Section 2.1.  The
   rules assume that the URL has already been separated from any
   surrounding text and copied to a "parse string".  The rules are
   listed in the order in which they would be applied by the parser.

2.4.1.  Parsing the Fragment Identifier

   If the parse string contains a crosshatch "#" character, then the
   substring after the first (left-most) crosshatch "#" and up to the
   end of the parse string is the <fragment> identifier.  If the
   crosshatch is the last character, or no crosshatch is present, then
   the fragment identifier is empty.  The matched substring, including
   the crosshatch character, is removed from the parse string before
   continuing.

   Note that the fragment identifier is not considered part of the URL.
   However, since it is often attached to the URL, parsers must be able
   to recognize and set aside fragment identifiers as part of the
   process.

2.4.2.  Parsing the Scheme

   If the parse string contains a colon ":" after the first character
   and before any characters not allowed as part of a scheme name (i.e.,
   any not an alphanumeric, plus "+", period ".", or hyphen "-"), the
   <scheme> of the URL is the substring of characters up to but not
   including the first colon.  These characters and the colon are then
   removed from the parse string before continuing.

2.4.3.  Parsing the Network Location/Login

   If the parse string begins with a double-slash "//", then the
   substring of characters after the double-slash and up to, but not
   including, the next slash "/" character is the network location/login
   (<net_loc>) of the URL.  If no trailing slash "/" is present, the
   entire remaining parse string is assigned to <net_loc>.  The double-
   slash and <net_loc> are removed from the parse string before



Fielding                    Standards Track                     [Page 6]


RFC 1808           Relative Uniform Resource Locators          June 1995


   continuing.

2.4.4.  Parsing the Query Information

   If the parse string contains a question mark "?" character, then the
   substring after the first (left-most) question mark "?" and up to the
   end of the parse string is the <query> information.  If the question
   mark is the last character, or no question mark is present, then the
   query information is empty.  The matched substring, including the
   question mark character, is removed from the parse string before
   continuing.

2.4.5.  Parsing the Parameters

   If the parse string contains a semicolon ";" character, then the
   substring after the first (left-most) semicolon ";" and up to the end
   of the parse string is the parameters (<params>).  If the semicolon
   is the last character, or no semicolon is present, then <params> is
   empty.  The matched substring, including the semicolon character, is
   removed from the parse string before continuing.

2.4.6.  Parsing the Path

   After the above steps, all that is left of the parse string is the
   URL <path> and the slash "/" that may precede it.  Even though the
   initial slash is not part of the URL path, the parser must remember
   whether or not it was present so that later processes can
   differentiate between relative and absolute paths.  Often this is
   done by simply storing the preceding slash along with the path.

3.  Establishing a Base URL

   The term "relative URL" implies that there exists some absolute "base
   URL" against which the relative reference is applied.  Indeed, the
   base URL is necessary to define the semantics of any embedded
   relative URLs; without it, a relative reference is meaningless.  In
   order for relative URLs to be usable within a document, the base URL
   of that document must be known to the parser.













Fielding                    Standards Track                     [Page 7]


RFC 1808           Relative Uniform Resource Locators          June 1995


   The base URL of a document can be established in one of four ways,
   listed below in order of precedence.  The order of precedence can be
   thought of in terms of layers, where the innermost defined base URL
   has the highest precedence.  This can be visualized graphically as:

      .----------------------------------------------------------.
      |  .----------------------------------------------------.  |
      |  |  .----------------------------------------------.  |  |
      |  |  |  .----------------------------------------.  |  |  |
      |  |  |  |   (3.1) Base URL embedded in the       |  |  |  |
      |  |  |  |         document's content             |  |  |  |
      |  |  |  `----------------------------------------'  |  |  |
      |  |  |   (3.2) Base URL of the encapsulating entity |  |  |
      |  |  |         (message, document, or none).        |  |  |
      |  |  `----------------------------------------------'  |  |
      |  |   (3.3) URL used to retrieve the entity            |  |
      |  `----------------------------------------------------'  |
      |   (3.4) Base URL = "" (undefined)                        |
      `----------------------------------------------------------'

3.1.  Base URL within Document Content

   Within certain document media types, the base URL of the document can
   be embedded within the content itself such that it can be readily
   obtained by a parser.  This can be useful for descriptive documents,
   such as tables of content, which may be transmitted to others through
   protocols other than their usual retrieval context (e.g., E-Mail or
   USENET news).

   It is beyond the scope of this document to specify how, for each
   media type, the base URL can be embedded.  It is assumed that user
   agents manipulating such media types will be able to obtain the
   appropriate syntax from that media type's specification.  An example
   of how the base URL can be embedded in the Hypertext Markup Language
   (HTML) [3] is provided in an Appendix (Section 10).

   Messages are considered to be composite documents.  The base URL of a
   message can be specified within the message headers (or equivalent
   tagged metainformation) of the message.  For protocols that make use
   of message headers like those described in RFC 822 [5], we recommend
   that the format of this header be:

      base-header  = "Base" ":" "<URL:" absoluteURL ">"

   where "Base" is case-insensitive and any whitespace (including that
   used for line folding) inside the angle brackets is ignored.  For
   example, the header field




Fielding                    Standards Track                     [Page 8]


RFC 1808           Relative Uniform Resource Locators          June 1995


      Base: <URL:http://www.ics.uci.edu/Test/a/b/c>

   would indicate that the base URL for that message is the string
   "http://www.ics.uci.edu/Test/a/b/c".  The base URL for a message
   serves as both the base for any relative URLs within the message
   headers and the default base URL for documents enclosed within the
   message, as described in the next section.

   Protocols which do not use the RFC 822 message header syntax, but
   which do allow some form of tagged metainformation to be included
   within messages, may define their own syntax for defining the base
   URL as part of a message.

3.2.  Base URL from the Encapsulating Entity

   If no base URL is embedded, the base URL of a document is defined by
   the document's retrieval context.  For a document that is enclosed
   within another entity (such as a message or another document), the
   retrieval context is that entity; thus, the default base URL of the
   document is the base URL of the entity in which the document is
   encapsulated.

   Composite media types, such as the "multipart/*" and "message/*"
   media types defined by MIME (RFC 1521, [4]), define a hierarchy of
   retrieval context for their enclosed documents.  In other words, the
   retrieval context of a component part is the base URL of the
   composite entity of which it is a part.  Thus, a composite entity can
   redefine the retrieval context of its component parts via the
   inclusion of a base-header, and this redefinition applies recursively
   for a hierarchy of composite parts.  Note that this might not change
   the base URL of the components, since each component may include an
   embedded base URL or base-header that takes precedence over the
   retrieval context.

3.3.  Base URL from the Retrieval URL

   If no base URL is embedded and the document is not encapsulated
   within some other entity (e.g., the top level of a composite entity),
   then, if a URL was used to retrieve the base document, that URL shall
   be considered the base URL.  Note that if the retrieval was the
   result of a redirected request, the last URL used (i.e., that which
   resulted in the actual retrieval of the document) is the base URL.

3.4.  Default Base URL

   If none of the conditions described in Sections 3.1 -- 3.3 apply,
   then the base URL is considered to be the empty string and all
   embedded URLs within that document are assumed to be absolute URLs.



Fielding                    Standards Track                     [Page 9]


RFC 1808           Relative Uniform Resource Locators          June 1995


   It is the responsibility of the distributor(s) of a document
   containing relative URLs to ensure that the base URL for that
   document can be established.  It must be emphasized that relative
   URLs cannot be used reliably in situations where the document's base
   URL is not well-defined.

4.  Resolving Relative URLs

   This section describes an example algorithm for resolving URLs within
   a context in which the URLs may be relative, such that the result is
   always a URL in absolute form.  Although this algorithm cannot
   guarantee that the resulting URL will equal that intended by the
   original author, it does guarantee that any valid URL (relative or
   absolute) can be consistently transformed to an absolute form given a
   valid base URL.

   The following steps are performed in order:

   Step 1: The base URL is established according to the rules of
           Section 3.  If the base URL is the empty string (unknown),
           the embedded URL is interpreted as an absolute URL and
           we are done.

   Step 2: Both the base and embedded URLs are parsed into their
           component parts as described in Section 2.4.

           a) If the embedded URL is entirely empty, it inherits the
              entire base URL (i.e., is set equal to the base URL)
              and we are done.

           b) If the embedded URL starts with a scheme name, it is
              interpreted as an absolute URL and we are done.

           c) Otherwise, the embedded URL inherits the scheme of
              the base URL.

   Step 3: If the embedded URL's <net_loc> is non-empty, we skip to
           Step 7.  Otherwise, the embedded URL inherits the <net_loc>
           (if any) of the base URL.

   Step 4: If the embedded URL path is preceded by a slash "/", the
           path is not relative and we skip to Step 7.









Fielding                    Standards Track                    [Page 10]


RFC 1808           Relative Uniform Resource Locators          June 1995


   Step 5: If the embedded URL path is empty (and not preceded by a
           slash), then the embedded URL inherits the base URL path,
           and

           a) if the embedded URL's <params> is non-empty, we skip to
              step 7; otherwise, it inherits the <params> of the base
              URL (if any) and

           b) if the embedded URL's <query> is non-empty, we skip to
              step 7; otherwise, it inherits the <query> of the base
              URL (if any) and we skip to step 7.

   Step 6: The last segment of the base URL's path (anything
           following the rightmost slash "/", or the entire path if no
           slash is present) is removed and the embedded URL's path is
           appended in its place.  The following operations are
           then applied, in order, to the new path:

           a) All occurrences of "./", where "." is a complete path
              segment, are removed.

           b) If the path ends with "." as a complete path segment,
              that "." is removed.

           c) All occurrences of "<segment>/../", where <segment> is a
              complete path segment not equal to "..", are removed.
              Removal of these path segments is performed iteratively,
              removing the leftmost matching pattern on each iteration,
              until no matching pattern remains.

           d) If the path ends with "<segment>/..", where <segment> is a
              complete path segment not equal to "..", that
              "<segment>/.." is removed.

   Step 7: The resulting URL components, including any inherited from
           the base URL, are recombined to give the absolute form of
           the embedded URL.

   Parameters, regardless of their purpose, do not form a part of the
   URL path and thus do not affect the resolving of relative paths.  In
   particular, the presence or absence of the ";type=d" parameter on an
   ftp URL does not affect the interpretation of paths relative to that
   URL.  Fragment identifiers are only inherited from the base URL when
   the entire embedded URL is empty.







Fielding                    Standards Track                    [Page 11]


RFC 1808           Relative Uniform Resource Locators          June 1995


   The above algorithm is intended to provide an example by which the
   output of implementations can be tested -- implementation of the
   algorithm itself is not required.  For example, some systems may find
   it more efficient to implement Step 6 as a pair of segment stacks
   being merged, rather than as a series of string pattern matches.

5.  Examples and Recommended Practice

   Within an object with a well-defined base URL of

      Base: <URL:http://a/b/c/d;p?q#f>

   the relative URLs would be resolved as follows:

5.1.  Normal Examples

      g:h        = <URL:g:h>
      g          = <URL:http://a/b/c/g>
      ./g        = <URL:http://a/b/c/g>
      g/         = <URL:http://a/b/c/g/>
      /g         = <URL:http://a/g>
      //g        = <URL:http://g>
      ?y         = <URL:http://a/b/c/d;p?y>
      g?y        = <URL:http://a/b/c/g?y>
      g?y/./x    = <URL:http://a/b/c/g?y/./x>
      #s         = <URL:http://a/b/c/d;p?q#s>
      g#s        = <URL:http://a/b/c/g#s>
      g#s/./x    = <URL:http://a/b/c/g#s/./x>
      g?y#s      = <URL:http://a/b/c/g?y#s>
      ;x         = <URL:http://a/b/c/d;x>
      g;x        = <URL:http://a/b/c/g;x>
      g;x?y#s    = <URL:http://a/b/c/g;x?y#s>
      .          = <URL:http://a/b/c/>
      ./         = <URL:http://a/b/c/>
      ..         = <URL:http://a/b/>
      ../        = <URL:http://a/b/>
      ../g       = <URL:http://a/b/g>
      ../..      = <URL:http://a/>
      ../../     = <URL:http://a/>
      ../../g    = <URL:http://a/g>

5.2.  Abnormal Examples

   Although the following abnormal examples are unlikely to occur in
   normal practice, all URL parsers should be capable of resolving them
   consistently.  Each example uses the same base as above.





Fielding                    Standards Track                    [Page 12]


RFC 1808           Relative Uniform Resource Locators          June 1995


   An empty reference resolves to the complete base URL:

      <>            = <URL:http://a/b/c/d;p?q#f>

   Parsers must be careful in handling the case where there are more
   relative path ".." segments than there are hierarchical levels in the
   base URL's path.  Note that the ".." syntax cannot be used to change
   the <net_loc> of a URL.

      ../../../g    = <URL:http://a/../g>
      ../../../../g = <URL:http://a/../../g>

   Similarly, parsers must avoid treating "." and ".." as special when
   they are not complete components of a relative path.

      /./g          = <URL:http://a/./g>
      /../g         = <URL:http://a/../g>
      g.            = <URL:http://a/b/c/g.>
      .g            = <URL:http://a/b/c/.g>
      g..           = <URL:http://a/b/c/g..>
      ..g           = <URL:http://a/b/c/..g>

   Less likely are cases where the relative URL uses unnecessary or
   nonsensical forms of the "." and ".." complete path segments.

      ./../g        = <URL:http://a/b/g>
      ./g/.         = <URL:http://a/b/c/g/>
      g/./h         = <URL:http://a/b/c/g/h>
      g/../h        = <URL:http://a/b/c/h>

   Finally, some older parsers allow the scheme name to be present in a
   relative URL if it is the same as the base URL scheme.  This is
   considered to be a loophole in prior specifications of partial URLs
   [1] and should be avoided by future parsers.

      http:g        = <URL:http:g>
      http:         = <URL:http:>

5.3.  Recommended Practice

   Authors should be aware that path names which contain a colon ":"
   character cannot be used as the first component of a relative URL
   path (e.g., "this:that") because they will likely be mistaken for a
   scheme name.  It is therefore necessary to precede such cases with
   other components (e.g., "./this:that"), or to escape the colon
   character (e.g., "this%3Athat"), in order for them to be correctly
   parsed.  The former solution is preferred because it does not affect
   the absolute form of the URL.



Fielding                    Standards Track                    [Page 13]


RFC 1808           Relative Uniform Resource Locators          June 1995


   There is an ambiguity in the semantics for the ftp URL scheme
   regarding the use of a trailing slash ("/") character and/or a
   parameter ";type=d" to indicate a resource that is an ftp directory.
   If the result of retrieving that directory includes embedded relative
   URLs, it is necessary that the base URL path for that result include
   a trailing slash.  For this reason, we recommend that the ";type=d"
   parameter value not be used within contexts that allow relative URLs.

6.  Security Considerations

   There are no security considerations in the use or parsing of
   relative URLs.  However, once a relative URL has been resolved to its
   absolute form, the same security considerations apply as those
   described in RFC 1738 [2].

7.  Acknowledgements

   This work is derived from concepts introduced by Tim Berners-Lee and
   the World-Wide Web global information initiative.  Relative URLs are
   described as "Partial URLs" in RFC 1630 [1].  That description was
   expanded for inclusion as an appendix for an early draft of RFC 1738,
   "Uniform Resource Locators (URL)" [2].  However, after further
   discussion, the URI-WG decided to specify Relative URLs separately
   from the primary URL draft.

   This document is intended to fulfill the recommendations for Internet
   Resource Locators as stated in [6].  It has benefited greatly from
   the comments of all those participating in the URI-WG.  Particular
   thanks go to Larry Masinter, Michael A. Dolan, Guido van Rossum, Dave
   Kristol, David Robinson, and Brad Barber for identifying
   problems/deficiencies in earlier drafts.

8.  References

   [1] Berners-Lee, T., "Universal Resource Identifiers in WWW: A
       Unifying Syntax for the Expression of Names and Addresses of
       Objects on the Network as used in the World-Wide Web", RFC 1630,
       CERN, June 1994.

   [2] Berners-Lee, T., Masinter, L., and M. McCahill, Editors, "Uniform
       Resource Locators (URL)", RFC 1738, CERN, Xerox Corporation,
       University of Minnesota, December 1994.

   [3] Berners-Lee T., and D. Connolly, "HyperText Markup Language
       Specification -- 2.0", Work in Progress, MIT, HaL Computer
       Systems, February 1995.
       <URL:http://www.ics.uci.edu/pub/ietf/html/>




Fielding                    Standards Track                    [Page 14]


RFC 1808           Relative Uniform Resource Locators          June 1995


   [4] Borenstein, N., and N. Freed, "MIME (Multipurpose Internet Mail
       Extensions): Mechanisms for Specifying and Describing the Format
       of Internet Message Bodies", RFC 1521, Bellcore, Innosoft,
       September 1993.

   [5] Crocker, D., "Standard for the Format of ARPA Internet Text
       Messages", STD 11, RFC 822, UDEL, August 1982.

   [6] Kunze, J., "Functional Recommendations for Internet Resource
       Locators", RFC 1736, IS&T, UC Berkeley, February 1995.

9.  Author's Address

   Roy T. Fielding
   Department of Information and Computer Science
   University of California
   Irvine, CA  92717-3425
   U.S.A.

   Tel: +1 (714) 824-4049
   Fax: +1 (714) 824-4056
   EMail: fielding@ics.uci.edu

10.  Appendix - Embedding the Base URL in HTML documents

   It is useful to consider an example of how the base URL of a document
   can be embedded within the document's content.  In this appendix, we
   describe how documents written in the Hypertext Markup Language
   (HTML) [3] can include an embedded base URL.  This appendix does not
   form a part of the relative URL specification and should not be
   considered as anything more than a descriptive example.

   HTML defines a special element "BASE" which, when present in the
   "HEAD" portion of a document, signals that the parser should use the
   BASE element's "HREF" attribute as the base URL for resolving any
   relative URLs.  The "HREF" attribute must be an absolute URL.  Note
   that, in HTML, element and attribute names are case-insensitive.  For
   example:

      <!doctype html public "-//IETF//DTD HTML//EN">
      <HTML><HEAD>
      <TITLE>An example HTML document</TITLE>
      <BASE href="http://www.ics.uci.edu/Test/a/b/c">
      </HEAD><BODY>
      ... <A href="../x">a hypertext anchor</A> ...
      </BODY></HTML>





Fielding                    Standards Track                    [Page 15]


RFC 1808           Relative Uniform Resource Locators          June 1995


   A parser reading the example document should interpret the given
   relative URL "../x" as representing the absolute URL

      <URL:http://www.ics.uci.edu/Test/a/x>

   regardless of the context in which the example document was obtained.













































Fielding                    Standards Track                    [Page 16]